Air Lift Timbren SES Suspension Enhancement System - 7,000lb Rear Kit | 2022-2026 Toyota Tundra - TimTORTTNDR

Air Lift Timbren SES Suspension Enhancement System - 7,000lb Rear Kit | 2022-2026 Toyota Tundra - TimTORTTNDR

These are the 2022+ Toyota Tundra Timbren Rear SES Suspension Enhancement System Truck Camper Kit Bump Stops, which are a much for any toyota owner towing or hauling RV's or trailers. 

Features

• Easy bolt on installation
• Rig Position: Rear
• Reduces sag, sway, and roll when towing and hauling
• Comfortable ride, loaded or unloaded
  
• Zero post-installation maintenance
• Rated Capacity: 7,000lb
• Overall Kit Height: 5.75"

What our Experts Think

• Up to 7,000 lbs of suspension support to reduce rear-end sag under heavy loads.
• Improves towing stability by minimizing sway, squat, and excessive suspension movement.
• Progressive rubber springs engage only when needed, maintaining a comfortable unloaded ride.
• Reduces bottoming out on rough roads and uneven terrain.
• Maintenance-free design with no airlines, compressors, or air pressure adjustments.
• Direct bolt-on installation using factory mounting points.
• Built for long-lasting durability in demanding work, towing, and hauling applications.

Q&A

Q: What vehicles does this Timbren SES kit fit?
A: This rear Suspension Enhancement System fits 2022–2026 Toyota Tundra models.

Q: What is the load capacity of this kit?
A: It is designed to provide up to 7,000 lbs of suspension support, helping reduce rear sag under heavy loads.

Q: What are the benefits of the Timbren SES system?
A: It helps reduce squat, improve stability, minimize body roll, and enhance towing and hauling performance.

Q: Does this replace the factory leaf springs?
A: No. The SES system works with the factory suspension, engaging only when additional support is needed.

Q: Will it affect the unloaded ride quality?
A: Under normal driving, the system has minimal impact on ride quality and activates progressively as the load increases.

Q: Is drilling required for installation?
A: No. This kit is designed as a bolt-on installation with no drilling required on most applications.

Q: Is this kit good for towing and hauling?
A: Yes. It is ideal for trailers, campers, work equipment, and heavy cargo, improving control and driver confidence.

Q: Does it help prevent bottoming out?
A: Yes. The rubber springs help absorb impacts and reduce bottoming out when carrying heavy loads.

Q: What is the product part number?
A: The Timbren part number is TORTTNDR.

Maintenance Tips

• Inspect the SES rubber springs every 5,000–10,000 miles or during routine maintenance.
• Check for cracks, tears, excessive wear, or deformation of the rubber springs.
• Ensure all mounting brackets and hardware remain secure and tightened to the manufacturer's specifications.
• Remove mud, dirt, road salt, and debris using mild soap and water.
• Avoid contact with petroleum-based chemicals, solvents, or harsh cleaners that can damage the rubber.
• Inspect for adequate clearance between the SES springs and axle/suspension components.
• Recheck hardware after heavy towing, hauling, or off-road use.
• Replace worn or damaged components promptly to maintain load support and ride quality.