Penta 18″ Square Drop In Hot Surface Electronic Ignition System - 18FSSEI-SQBL-120VAC-NG

Penta 18″ Square Drop In Hot Surface Electronic Ignition System - 18FSSEI-SQBL-120VAC-NG

This is our top-of-the-line gas fire pit system featuring the ignition ease with use of a wall switch or handheld remote to control flame as well as auto-relight if flame loss.

This is our most advanced control system with numerous convenience and performance improvements for both On/Off Models and our newly introduced High/Low Models- such as High/Low flame control via our new remote or smart phone app, a redesigned hot surface igniter and many other improvements. 

• The fire pit pan is 2-3/8″ deep w/ 1-3/8″ lip.
• Fully Assembled- ready to install. Control components are protected within stainless steel valve box.
• Start via wall switch, remote or whole house system; auto re-light if flame is lost.
• Ignition is complete using a robust and reliable Hot Surface igniter.
• On/Off models: Use with optional wall switch or Remote Control available.
• High/Low Flame Control Models: Adjust high setting to low setting- ~45% turn down (Remote Control and Smart Phone App included).
• 120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet.
• 24vac Option: Typically used pool side or with other lower voltage requirements.
• Natural Gas or Liquid Propane: Factory built & tested for either fuel.
• Internal temperature monitoring with overheat auto shutoff.
• CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements.
• Optional Controls: On/Off Remote, Timers, Power Supplies and an Emergency Shutoff. (See accessories)

What Our Experts Think

• 18″ square Penta drop-in burner with hot surface electronic ignition for reliable, consistent flame start-up.

• Durable, professional-grade construction for residential and commercial fire pits.

• Provides even flame distribution and efficient heat output.

• Designed for safety, efficiency, and long-lasting outdoor performance.

• Ideal for small custom square fire pit installations.

Q&A

• Q: What fuel does it use?
  A: Natural gas (NG) connection required.

• Q: Is it compatible with square fire pits?
  A: Yes, engineered for 18″ square Penta drop-in setups; verify dimensions before installation.

• Q: Is professional installation recommended?
  A: Yes, for safe gas hookup and optimal ignition performance.

Maintenance Tips

• Inspect burner ports and gas connections regularly for leaks.

• Keep burner surface and pan free of debris.

• Clean with mild soap and water; avoid harsh chemicals.

• Protect from harsh weather when not in use.

• Follow manufacturer guidelines for hot surface ignition system care.