Excellent 4.9 | 18,452 reviews

DC Audio 7.5k - 7,500w Monoblock Amplifier - DCA7.5K

DC Audio 7.5k - 7,500w Monoblock Amplifier - DCA7.5K

$1,567.99
$1,567.99 $2,089.99
SAVE 24% Sold out
DC Audio 7.5k - 7,500w Monoblock Amplifier - DCA7.5K

DC Audio 7.5k - 7,500w Monoblock Amplifier - DCA7.5K

$1,567.99
$1,567.99 $2,089.99
SAVE 24% Sold out

DC Audio 7.5k - 7,500w Monoblock Amplifier - DCA7.5K

The 7.5kw competition series amplifier is a 7,500 watt mono block. It is capable of running up to 18 volts

for up to 9,200 watts. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped.
It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power
and dual 0 awg for ground.

Features
  • 1 ohm stable
  • Variable low pass filter
  • Variable subsonic filter
  • Variable bass boost
  • Wired remote control
  • Dual 0 awg power and ground inputs (both must be used)
Specifications
Features Voltage 7.5kw
Output Power (RMS) 4 ohm 14.4V 2,000W x 1
2 ohm 4,400W x 1
1 ohm 7,500W x 1
1 ohm 16V 8,600W x 1
1 ohm 18V 9,200W x 1
Input Sensitivity 6V~0.2V
Low Pass Filter Switchable
( @ 24 dB Slope) Variable Hz 35~250
Subsonic Filter Switchable
( @ 24dB slope ) Variable Hz 10~50
Bass Boost Variable dB 0-9dB
Frequency Response Hz 15-270
Signal to Noise Ratio dB 100
Damping factor 150<
Efficiency @ 4ohm % Over 90%
THD @ 4ohms Less than 0.1%
Fuse Rating 750 Amps
Linked Fuse Rating 1500 Amps
Indicator Power Yes
Protection Yes
Clip No
Speaker & Power terminal Mold Type Yes
Power Gauge 0Ga x 2
Heatsink Length inch/mm 32.28"/820mm

 

What Our Experts Think
  • The DC Audio 7.5k (DCA-7.5K) is a high-output Class D monoblock amplifier built for serious SPL and competition bass systems
  • Delivers up to 7,500W RMS @ 1Ω (14.4V system voltage) with strong efficiency and stability for extreme subwoofer setups
  • Can reach ~9,200W output at higher system voltage (around 18V setups) in advanced electrical builds
  • Fully linkable/strap-capable design, allowing multiple amps to be combined for massive power systems
  • Accepts dual 0 AWG power and ground inputs for high-current delivery and stable performance under load
  • Includes full tuning control: low-pass filter, subsonic filter, bass boost, phase adjustment, and remote bass control
  • Built for competition-grade subwoofer systems, typically paired with multiple high-power 15"–18" drivers
  • Requires upgraded electrical system (high-output alternator + AGM or lithium battery bank) for safe operation
Q&A

Q: How much power does the DC Audio 7.5k produce?
A: It delivers 7,500 watts RMS at 1 ohm, with higher output possible at increased voltage systems.

Q: Is it stable at 1 ohm?
A: Yes, it is fully 1-ohm stable and designed for high-current SPL applications.

Q: Can it be used daily?
A: Yes, but it is primarily designed for competition or high-performance bass systems.

Q: Does it support linking with other amps?
A: Yes, it is linkable/strap-capable for multi-amplifier setups.

Q: What subs work best with it?
A: High-power SPL subwoofers such as DC Audio Level series, Sundown ZVX, or similar competition drivers

Maintenance Tips
  • Maintain stable voltage under load to prevent clipping and damage
  • Use proper gain tuning and avoid overdriving the amplifier
  • Ensure strong grounding and multiple 0 AWG power runs for stability
  • Provide adequate airflow to prevent thermal protection shutdown
  • Upgrade alternator and battery system before running full power
  • Break in subwoofers properly before applying full wattage levels
View full details