Excellent 4.9 | 18,452 reviews

DC Audio 10.0k - 10,000w Monoblock Amplifier - DCA-10k

DC Audio 10.0k - 10,000w Monoblock Amplifier - DCA-10k

$1,979.99
$1,979.99 $2,639.99
SAVE 25% Sold out
DC Audio 10.0k - 10,000w Monoblock Amplifier - DCA-10k

DC Audio 10.0k - 10,000w Monoblock Amplifier - DCA-10k

$1,979.99
$1,979.99 $2,639.99
SAVE 25% Sold out

DC Audio 10.0k - 10,000w Monoblock Amplifier - DCA-10k

The 10.0kw competition series amplifier is a 10,000 watt mono block. It is built for 12 volt audio systems.

It will not operate on 16 or 18 volt systems. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped for 20,000 watts of power. It comes with a bass knob and a clipping indicator.
For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.

Features
  •  1 ohm stable
  •  Variable low pass filter
  •  Variable subsonic filter
  •  Variable bass boost
  •  Wired remote control
  •  Triple 0 awg power and ground inputs
Specifications
Features Voltage 10.0kw
Output Power (RMS) 4 ohm 14.4V 3,000W x 1
2 ohm 5,500W x 1
1 ohm 10,000W x 1
1 ohm 16V N/A
1 ohm 18V N/A
Input Sensitivity 6V~0.2V
Low Pass Filter Switchable
( @ 24 dB Slope) Variable Hz 35~250
Subsonic Filter Switchable
( @ 24dB slope ) Variable Hz 10~50
Bass Boost Variable dB 0-9dB
Frequency Response Hz 15-270
Signal to Noise Ratio dB 100
Damping factor 150<
Efficiency @ 4ohm % Over 90%
THD @ 4ohms Less than 0.1%
Fuse Rating 1,000 Amps
Linked Fuse Rating 2,000 Amps
Indicator Power Yes
Protection Yes
Clip Yes
Speaker & Power terminal Mold Type Yes
Power Gauge 0Ga x 3
Heatsink Length 37
Heatsink Width inch/mm 11.5
Heatsink Height 2.6
What Our Experts Think
  • The DC Audio 10.0k Monoblock Amplifier (DCA-10k) is a true competition-grade Class D amplifier built for extreme SPL car audio systems
  • Delivers up to 10,000W RMS @ 1Ω (14.4V system voltage) for high-output subwoofer setups
  • Engineered for 12V systems only (not compatible with 16V–18V electrical setups)
  • Supports high-current triple 0 AWG power and ground inputs for stable power delivery under load
  • Includes bass remote with clipping indicator for safer tuning at high output levels
  • Designed for serious SPL builds, typically paired with multiple high-power subs (15"–18")
  • Includes advanced tuning controls: low-pass filter, subsonic filter, bass boost, and phase adjustment
  • Requires a heavily upgraded electrical system (high-output alternator + lithium/AGM bank) for reliable performance
Q&A

Q: How much power does the DC Audio 10.0k produce?
A: It delivers up to 10,000 watts RMS at 1 ohm, with lower outputs at higher impedances.

Q: What voltage does it support?
A: It is designed strictly for 12V systems, with safe operating limits up to about 15.3V.

Q: Is it suitable for daily driving?
A: Yes, but only in properly tuned systems; it is primarily designed for SPL or high-output builds.

Q: What subs work best with it?
A: High-power competition subs such as DC Audio Level series, Sundown ZV/X series, or similar SPL drivers.

Q: What do you need to run it safely?
A: Upgraded alternator(s), lithium or large AGM battery bank, and 0 AWG (or larger) wiring.

Maintenance Tips
  • Always monitor voltage stability (avoid drops under heavy bass load)
  • Use a properly set gain with a clip indicator to prevent distortion damage
  • Ensure strong grounding and multiple 0 AWG power runs as recommended
  • Keep amplifier well-ventilated to avoid thermal shutdown
  • Pair with correctly tuned subwoofer enclosure to prevent over-excursion
  • Do not exceed safe system voltage limits (above ~15.3V risks damage/warranty void)
View full details