CleanFreak Softwash System (300 PSI @ 11.5 GPM) w/ Comet P40 Pump & Electric Start 6.5 HP Vanguard Engine - WET-SW11300-CMT-SK

CleanFreak Softwash System (300 PSI @ 11.5 GPM) w/ Comet P40 Pump & Electric Start 6.5 HP Vanguard Engine - WET-SW11300-CMT-SK

Unfortunately, this item has been discontinued by the manufacturer.

Please take a look at our full line of softwash systems for other options that we do still have available.

What our Experts Think

                   
Q&A  

Q: What is the CleanFreak Softwash System (300 PSI @ 11.5 GPM) used for?
A: This skid-mounted softwash system is designed for low-pressure, high-volume cleaning of exterior surfaces like roofs, siding, fences, decks, and commercial buildings, safely removing mold, algae, mildew, and organic buildup.

Q: What makes this softwash system different from a pressure washer?
A: Unlike high-pressure washers, it uses only 300 PSI combined with high flow (11.5 GPM) to apply cleaning solution gently, preventing damage to paint, shingles, and delicate surfaces.

Q: What pump and engine does it use?
A: It runs a Comet P40 diaphragm pump paired with a 6.5 HP Vanguard gas engine with electric start for reliable field operation and chemical resistance.

Q: Is this system designed for chemical use?
A: Yes. The diaphragm pump and fittings are built to handle bleach and softwash chemicals for killing algae, mold, mildew, and bacteria effectively.

Q: Is it portable or truck-mounted?
A: It comes skid-mounted, allowing it to be installed on a trailer, truck bed, or service rig for mobile softwashing operations.

Q: What kind of work is it best suited for?
A: It’s ideal for professional exterior cleaning contractors handling residential roof washing, commercial building washing, and high-volume rinse applications.

Q: Is this model still available?
A: No. This specific WET-SW11300-CMT-SK model has been discontinued by the manufacturer, though similar softwash systems are still available.

                 
Maintenance Tips  

• Flush hoses, wand, and system lines with clean water after each use to remove chemical residue and prevent clogging.
• Inspect low-pressure lines, fittings, and valves regularly for leaks or wear to ensure safe softwashing operation.
• Clean or replace filters frequently to protect the Comet P40 pump and maintain steady 11.5 GPM flow.
• Check 6.5 HP Vanguard engine oil, battery (electric start), and air filter for reliable startup and performance.
• Use manufacturer-approved softwash solutions only to prevent pump damage and seal degradation.
• Rinse chemical tanks thoroughly after use to avoid crystallization, sediment buildup, and cross-contamination.
• Inspect nozzles and proportioning system to ensure accurate chemical mixing and consistent spray output.
• Store unit in a dry, ventilated area and protect from freezing temperatures and prolonged moisture exposure.