Reclaim Your Land with Confidence
Overgrown fence lines, dense brush, and encroaching saplings can quickly turn productive acreage into an unmanageable mess. The Baumalight MP560 Fixed Tooth Brush Mulcher is purpose-engineered for Power Take-Off attachment on tractors, giving farmers, ranchers, property owners, and entry-level contractors the ability to take back control of their land with professional-grade results.
Designed to mount on Category II 3-point hitch tractors between 45 and 75 horsepower, the MP560 fills the sweet spot between basic mowing attachments and full-scale forestry machinery. It delivers the cutting power needed for heavy brush and small trees up to 6 inches in diameter, while remaining practical and manageable for operators of all experience levels.
60”
Rotor Cutting Width
75”
Total Path Width
6”
Max Brush Diameter
45–75
Tractor HP Range
Choose Your Cutting Style: Planer or Ripper
Not every clearing job is the same, and the MP560 acknowledges that with two distinct carbide-tipped tooth options. Each configuration is tailored to specific working conditions, so you can optimize performance based on the terrain and material you are dealing with.
Planer teeth are designed to take precise, controlled bites through vegetation. They excel at producing fine, uniform mulch and deliver maximum cutting efficiency. This is the go-to choice when clean output and high processing speed are your priorities.
Ripper teeth feature a V-shaped profile built for aggressive shredding action. Their geometry makes them highly resistant to impacts from rocks, roots, and buried debris. Select these for below-grade work, rocky ground, and demanding fence line clearing tasks.
Hydraulic Cutting Shield for On-the-Fly Adjustments
What sets the MP560 apart from many competing mulchers is its adjustable cutting shield. Rather than being locked into a single angle of attack, operators can open the shield wider for a more aggressive approach on larger, thicker brush, or close it down to contain material and achieve a finer mulch consistency.
The single debris door is controlled hydraulically from the tractor cab, so you never have to dismount to make adjustments. When sealed, the mulch output is tighter and more refined. When opened, the machine can accept bigger material and work at a steeper angle. This level of in-cab control lets you adapt to changing vegetation density across your property without missing a beat.
Drive Forward, Not Just Reverse
Traditional tractor-mounted mulchers typically require you to reverse into standing brush and work backward. The Baumalight MP560 eliminates that constraint entirely. Its rotor and frame design allows you to drive forward over previously mulched material, grinding it down further into an even finer output on the second pass.
This bi-directional processing capability transforms the way you approach large clearing jobs. Instead of constant reversing and repositioning, you maintain natural forward momentum, covering more ground with fewer passes and significantly less operator fatigue over extended work sessions.
Direct Drive Power Transmission
Power flows from the tractor engine through the 540 RPM PTO shaft, into a heavy-duty gearbox, through a reinforced drive belt, and directly to the mulching rotor. This uninterrupted chain of transmission means the MP560 captures every bit of available horsepower and delivers it straight to the cutting teeth where it counts.
The reinforced belt serves a critical dual purpose: it transmits high torque reliably while simultaneously absorbing the shocks and sudden impacts that are unavoidable during mulching. This belt-driven buffer helps protect both the gearbox internals and the tractor PTO from premature wear and costly repairs.
Multi-Layer Protection System
Slip Clutch Protection
Disengages the drivetrain automatically when torque spikes beyond safe thresholds, shielding the gearbox and PTO from overload damage.
Wire Guard Shield
A steel protective cover prevents wire fencing and tangled debris from wrapping around the rotor shaft during fence line work.
Rear Chain Curtain
Guides standing brush into the cutting zone while containing mulched debris within the machine, minimizing flying material hazards.
Double-Sleeved Hydraulics
Every hydraulic hose is wrapped with protective sleeves and additional hose armor for double-layer defense against punctures and wear.
Field-Ready Features for Real Work
The MP560 goes well beyond raw cutting power. It is loaded with practical design elements that address the everyday challenges operators face during extended clearing sessions.
Integrated Brush Bar
Tall vegetation naturally falls away from the rotor instead of feeding into it. The built-in brush bar solves this by bending taller brush forward into the cutting path, ensuring thorough processing on every pass without leaving standing material behind.
Two-Position Adjustable Skid Shoes
Fine-tune cutting height from roughly 1.5 inches above grade down to 1 inch below grade. This flexibility allows you to match the mulching depth precisely to your terrain, whether you are skimming the surface or cutting below ground level to tackle root systems.
Spiral Tooth Pattern
The rotor tooth layout follows a spiral arrangement so that only one tooth makes contact with material at any given moment. This staggers the cutting load across the rotation, producing a noticeably smoother operation with less vibration, lower power spikes, and reduced strain on your tractor.
Heavy-Duty V-Notch Tooth Holders
Impact forces during mulching routinely bend and deform tooth holders on inferior equipment. The MP560 uses hardened holders featuring a V-notch locking mechanism that grips each tooth securely and absorbs impacts from multiple directions without warping.
Complimentary Replacement Teeth
Every MP560 includes a free set of six replacement teeth shipped inside a secure built-in compartment welded to the frame. When a tooth wears down or breaks, your spares are already on the machine and ready to install without a trip to the dealer.
Construction That Endures Season After Season
The MP560 frame is fabricated from T1 alloy tool steel sheet metal in all critical high-wear areas, delivering structural toughness that stands up to the relentless forces of brush mulching over hundreds of operating hours. A factory-applied powder coat finish provides far greater resistance to rust, chipping, and abrasion than traditional paint.
All main pivot points are equipped with greaseable pins for easy routine lubrication. The spring bushings at these pivot locations are manufactured from high-grade chrome-vanadium AISI 6150 spring steel, a material chosen specifically for its resilience under repetitive stress and vibration.
Even the operator experience was factored into the build. Anti-slip pads are placed across the frame to provide secure footing when entering or exiting the tractor cab alongside the mounted mulcher, reducing the risk of slips during wet or muddy conditions.
Full Technical Specifications
| Specification | Details |
| Model | MP560-540 |
| Rotor Width | 60 Inches |
| Path Width | 75 Inches |
| Tractor HP Range | 45 – 75 HP Engine (65 HP Max PTO) |
| PTO Speed | 540 RPM |
| Hitch Requirement | Category II 3-Point Hitch |
| Max Brush Capacity | Up to 6” Diameter |
| Cutting Depth | 1.5” Above to 1” Below Grade |
| Tooth Type | Carbide-Tipped Bolt-In (Planer or Ripper) |
| Hydraulic Remotes | 1 Required |
| Unit Weight | Approx. 2,145 lbs |
| Shipping Dimensions | 72” L x 70” W x 50” H |
Where the MP560 Excels
The combination of a wide cutting path, adjustable depth, dual tooth options, and forward-drive capability makes the MP560 suitable for a broad variety of land management situations across agricultural, residential, and light commercial settings.
Fence Line Clearing
Eliminate overgrown brush along property boundaries quickly and thoroughly.
Pasture Restoration
Reclaim grazing land and farmland from invasive vegetation and saplings.
Trail and Road Access
Maintain clear access paths, fire breaks, and recreational trails year-round.
Entry-Level Contracting
Tackle professional clearing jobs with commercial-grade equipment at a practical scale.
Simple Maintenance, Readily Available Parts
Baumalight deliberately engineers the MP560 with industry-standard components sourced from commonly available suppliers. Bearings, belts, seals, and replacement teeth can often be picked up at local supply shops rather than requiring factory-direct ordering. This design philosophy keeps your downtime to a minimum and your operating costs manageable.
Routine servicing is straightforward thanks to greaseable pins at every pivot point. No proprietary tools, no complex teardown procedures. Just standard grease maintenance that any tractor operator can handle in the field, keeping the MP560 running reliably through hundreds of hours of demanding work.
The Bottom Line on the Baumalight MP560
With dual tooth configurations, an adjustable hydraulic cutting shield, forward-drive processing, slip clutch protection, and a heavy-duty T1 steel frame, the MP560 brings serious mulching capability to any tractor in the 45–75 HP range. It is the kind of equipment that makes clearing projects faster, easier, and more consistent, whether you are managing a family farm, maintaining a large estate, or running a contracting operation.